ISI Melt Pressure Transducers

ISI Model 0100
The 0100 converts applied pressure at the point of measurement to a proportional voltage output signal using well established bonded strain gage design principals. 

The small capillary tube filled with a special medium isolates the strain gage and electronics from potential thermal damage.   The rigid stem makes installation fast and easy.

Model
Accuracy
Connector
Output
Other
0100
1.0%
6-Pin
Strain Gage
  
0110
0.5%
6-Pin
Strain Gage
  
0120
0.5%
8-Pin
Strain Gage
  
0160
1.0%
8-Pin
Strain Gage
0130
0.5%
6-Pin
4-20ma
  
0140W
0.5%/1.0%
Conduit
4-20ma
FM Approved
0270
0.5%/1.0%
6-Pin
0-10vdc
ISI Model 0101
The 0101 offers all the advantages of Model 0100, but incorporates an 18-inch flexible capillary tubing with a stainless steel armored jacket between the strain gage housing and the stem. 
These transducers are designed for applications requiring further thermal isolation or where installation would be otherwise difficult or impractical.
Model
Accuracy
Connector
Output
Other
0101
1.0%
6-pin
Strain Gage
  
0111
0.5%
6-pin
Strain Gage
  
0121
0.5%
8-pin
Strain Gage
  
0161
1.0%
8-Pin
Strain Gage
  
0131
0.5%
6-pin
4-20ma
  
0141W
0.5%/1.0%
Conduit
4-20madc
FM Approved
0271
0.5%/1.0%
6-Pin
0-10vdc
Model 0102
The 0102 provides simultaneous measurement of pressure and temperature at a single point.

Only one mounting hole is required for installation. The thermocouple or optional RTD is protected from process hazards and can be replaced without interrupting the pressure signal. 

Pressure performance is identical to Models 0100 and 0101. 


 
Model
Accuracy
Connector
Output
 Other
0102
1.0%
6-pin
Strain Gage
  
0112
0.5%
6-pin
Strain Gage
  
0122
0.5%
8-pin
Strain Gage
  
0162
1.0%
8-pin
Strain Gage
0132
0.5%
6-pin
4-20ma
  
0142W
0.5%/1.0%
Conduit
4-20madc
FM Approved
0272
0.5%/1.0%
6-Pin
0-10vdc
Pressure Gauges Gauges
Other ISI Products
Melt Pressure Gauges
McGoff-Bethune, Inc.
5970 Unity Drive Suite A
Norcross, GA 30071
770-840-9811    800-303-4705     Fax: 770-840-7514

www.mcgoff-bethune.com
sales@mcgoff-bethune.com


temperature control, temperature controller, process control, thermocouple, Barber-Colman, Yokogawa,  Partlow, 560, 570, Versicase, MACO, actuator, calibration, installation, Exergen, Payne, inventory, System, repair, service, heater, NIST, power, RTD, SCR, solid state relay, limitrol, analog, blow, carbon potential, Chino, Recorder, design, engineer, extrusion, fuzzy, hardness, heat, treat, infrared, injection, integration, ISI, M-System, melt, mercury, molding, panel, PID, portable, pressure, Protection, Reserve, flame, safeguard, scanner, signal, tester, tube, turnkey, Western, Balluff, Eurotherm, Halmar, Honeywell, proportional, Robicon, Stromquist, Super, transducer, www.mcgoff-bethune.com, 4-20, Absolute, acquisition, API, automation, calibrate, calibrator, CE, certification, Chart, dew point, extruder, furnace, Industrial, instrument, instrumentation, integrator, IRt/c, kiln, loop, measurement, meter, plastic, Precision, probe, project, relative, mcgoff-bethune.com