CHINO BL AND BH Strip Chart Recorders

xxx
BL
Series
BH
Series
Size:H x W
H144 x W144
H288 x W288
Input
DC Voltage: +-7mV, +-14mV, +-25mV,
+-70mV, +-5V
DC Current: Applicable by adding a 
shunt resistor
Thermocouples B, R, S, K, E, J, T, N,
Ni-NiMo, Au-Fe-Cr,
PR5-20, PR20-40
WWRe5-26, WWRe0-26,
Platinel, U, L
Resistance Thermometer: Pt100, JPt100, JPt50, Pt-Co
 
DC Voltage: +-7mV, +-14mV, +-25mV,
+-70mV, +-5V
DC Current: Applicable by adding a
shunt resistor
Thermocouples B, R, S, K, E, J, T, N,
Ni-NiMo, Au-Fe-Cr,
PR5-20, PR20-40
WWRe5-26, WWRe0-26,
Platinel, U, L
Resistance Thermometer: Pt100, JPt100, JPt50, Pt-Co
 
Scale Width 100mm calibrated width (analog record) 180mm calibrated width
Indicating
Accuracy		 +-0.3%+-1 digit or +-1C (T/C, RTD)
+-0.2%+-1 digit (DC voltage)		 +-0.3%+-1 digit or +-1C (T/C, RTD)
+-0.1%+-1 digit (DC voltage)
Measuring
Cycle		 Pen type: 125 msec.
Dot type: 5 sec./6-point		 Pen type: 125 msec.
Dot type: 5 sec./6-point, 10 sec/12-point, 20 sec/24-point
Chart Paper Fanhold chart, 100mm calibrated width, 10m long Fanhold chart, 180mm calibrated width, 20m long
Measuring
Points
Pen type: 1, 2 or 3-pen
Dot type: 6-point
 
Pen type: 1,2 or 3-pen
Dot type: 6, 12 or 24-point
 
Recording
Pen type: Cartridge pen
Dot type: Wire dot 6-color ribbon
 
Pen type: Cartridge pen
Dot type: Wire dot 6-color ribbon
 
Print Interval 5 sec./point (dot type) 5 sec./point (dot type)
Chart Speed 1 to 599mm/hr, 10 to 200mm/min (pen type)
1 to 1500mm/hr (dot type)		 1 to 599mm/hr, 10 to 200mm/min (pen type)
1 to 1500mm/hr (dot type)
Alarms H/L limits (individual set, 6 comon outputs and OR alarm)
(option)		 H/L limits (individual set, 6 comon outputs and OR alarm)
(option)
Others A communication interface (RS-232C, RS422-A or RS-485)
is available. (option)		 A communication interface (RS-232C, RS422-A or RS-485)
is available. (option)

xxx
McGoff-Bethune, Inc.
5970 Unity Drive Suite A
Norcross, GA 30071
770-840-9811    800-303-4705     Fax: 770-840-7514
sales@mcgoff-bethune.com
www.mcgoff-bethune.com