| Measuring points |
Pen-writing type |
1-pen, 2-pen, 3-pen or
4-pen |
| Dot-printing type |
6 points |
| Input signals |
Universal input |
| Thermocouples |
B, R, S, K, E, J, T, N,
W-WRe26, WRe5-WRe26, PtRh40-PtRh20, NiMo-Ni, CR-AuFe, Platinel II, U, L |
| Resistance thermometers |
Pt100 (IEC751-1995),
Pt100 (IEC751-1983), JPt100,Pt50, Pt-Co |
| DC voltage |
±13.8mV,
±27.6mV, ±69.0mV, ±200mV, ±500mV,
±2V,±5V, ±10V, ±50V, ±50V |
| DC current |
By shunt resistor |
| Contact input (option in
pen-writing type, operational record) |
| Accuracy rating |
±0.1% of measuring
range ± 1 digit (DC voltage, thermocouple, resistance
thermometer inputs) |
| Measuring cycle |
Pen-writing type |
About 100ms |
| Dot-printing type |
About 5 seconds/6-point,
about 1 second/6-point (option) |
| Reference junction
compensation accuracy |
K, E, J, T, N, Platinel
II ………………………………… Maximum ±0.5°C
R, S, W-WRe26, WRe5-WRe26, NiMo-Ni, CR-AuFe, U, L
…………………………………………………………… Maximum ±1.0°C
(The above errors are added to the accuracy ratings for an internal
reference junction compensation.) |
| Burnout |
For thermocouple and
resistance thermometer inputs (up-scale, down-scale or burnout disable) |
| Terminal board |
Detachable |
| Printing system |
Pen-writing type |
Analog tracing |
Disposal cartridge pen |
| Digital printing |
Plotter pen |
| Dot-printing type |
Wire-dotting system
6-color ribbon |
| Printing colors |
Pen-writing type |
1st-pen red, 2nd-pen
green, 3rd-pen blue, 4th-pen brown |
| Dot-printing type |
1 red, 2 black, 3 blue, 4
green, 5 brown, 6 purple |
| Chart |
Fan-fold type, effective
width 100mm, total width 114mm, total length 10m |
| Chart speed |
Pen-writing type |
1 to 600mm/h, 1 to
200mm/min (default - 20mm/h) |
| Dot-printing type |
1 to 1500mm/h (default -
20mm/h) |
| Skip function |
No display or printings
of channels |
| Subtract printing |
Printing of difference of
measured values of one channel and other channel (or reference value) |
| Pen-lift function |
By RECORD OFF key, all
pens are lifted up simultaneously.
A lever for manually lifting up/down of all pens is provided. |
| Alarm type |
Absolute value,
differential, rate-of-change
(Absolute value/standby and differential/standby are additionally
available in pen-writing types. each 2 levels) |
| Alarm programming |
Individual programming
each channel, Maximum 4 levels/channel
output: option) |
| Rated power voltage |
100 to 240VAC 50/60Hz,
universal power supply |
| Power consumption |
Pen-writing type |
About 60VA |
| Dot-printing type |
About 45VA |
| Environmental conditions |
Reference operation
condition |
Ambient
temperature/humidity range: 21 to 25°C/45 to 65%RH Power voltage:
100VAC ± 1% Attitude: Left/right 0 degree, forward tilting 0
degree, backward tilting 0 degree Warm-up time: 30minutes or longer |
Normal
operation
condition |
Ambient
temperature/humidity range: 0 to 40°C/20 to 80%RH Power voltage: 90
to 264VAC Attitude: Left/right 0 to 10 degrees, forward tilting 0
degree, backward tilting 0 to 30 degrees |
| Mounting |
Panel mounting |
| Dimensions |
W144 x H144 x D244mm
(standard specifications) |
| Weight |
Pen-writing type |
About 9.0kg (4-pen/with
full options) |
| Dot-printing type |
About 8.5kg (with full
options) |
| Standards |
CE |
EN61326 + A1 Class A,
EN61000-3-2 + A14
EN61000-3-3, EN61010-1 + A2 |
| UL |
UL3111-1 (pen-writing
type - approval pending) |
| CSA (C-UL) |
C22.2, No. 1010
(pen-writing type - approval pending) |
| IP |
IEC529 IP54 (front
protection) |
